Sub-Micronic Canister Filter 1/2" NPT
Price on Application (POA)
Price on application. Add what you need, then send one request for everything.
Availability & Price Confirmed with your Quote
- Response back by the next working day
- Technical advice upon request
- Local Australian support
Description
Description
Motor Guard M60 Sub-Micronic Canister Filter with 1/2" Side Entry Inlet & Outlet.
Remove oil and water particles from the air with a greater degree of efficiency using the MotorGuard Comp Air Filter. This compressed air filter utilizes a distinct method of filtration to create a labyrinth of sub-micronic openings from the interlocking fibers on the fabric surfaces. This enables capturing particles as tiny as .01 microns. The patented compression technique preserves a suitable filter density, ensuring optimum efficiency with a minimum drop in pressure at a good flow rate.
The M-60 air compressor filter model provides very clean air. The filter is a disposable and non-degrading type that is free of parts that can contaminate the system. This filtration unit enables a maximum flow of 100 CFM at 80 PSI. It is recommended that you use this model of air filter at the wall drop. It features 1/2 inch ports to enable installing directly in-line on rigid air lines.
Key Features of the MotorGuard Comp Air Filter:
Helps in effective removal of oil and water from the air
Mounts directly
Ultra-filtration of compressed air
Filters particles as tiny as .01 microns
Technical Specifications
Port Size 1/2" NPT
Max. Flow @ 5.5BAR 2831L/Min 100cfm
Max. Pressure 8.6BAR 125PSI
Max. Temperature 79°C
Removal Rating 0.01microns
Replacement Element: M-723
These compressed air filters utilise the dual compression concept and are designed to remove oil aerosols, smokes, condensed moisture and sub-micronic solid particles from compressed air and vacuum lines.
They provide high efficiency filtration with high flow rates and an acceptable pressure drop in a small, compact housing. Their efficiency is illustrated by the fact that you can manually blow through the unit without difficulty, but the air will not pass tobacco smoke. The filters should be installed to supplement rather than replace any existing moisture traps, dryers and filters in the air lines.
The conventional equipment should remove most of the moisture and solid contaminants above certain specified size and the Motor Guard filter will remove a high percentage of the remaining condensed moisture, oil aerosols and sub-micronic particles from the air.
Applications for Motor Guard filters include the following:
* Plasma cutting systems
* Spray painting shops
* Pneumatic controls
* Air drying
* Food processing
* Instrumentation systems
* Air bearings
* Circuit board manufacture
* Plating solution agitation
* Magnetic tape drives
* Fluidic controls
* Gas chromatography
Care information
Care information
Quality you can work with
Every product we supply is chosen to perform in real working conditions — workshops, pit lanes, factory floors and job sites right across Australia. We stock genuine, trade-grade brands from manufacturers we've dealt with for years, so what arrives is what was ordered.
Looking after it
Keep threads and sealing surfaces clean and free of grit before assembly. Wipe down after use and store dry. Inspect fittings, hoses, seals and moving parts regularly for wear or damage, and replace anything showing it. Always tighten to the manufacturer's specification — over-tightening is the single most common cause of premature failure.
Not sure what suits your application? Talk to our team — we've been supplying Australian industry and motorsport for over 50 years.
Delivery and Shipping
Delivery and Shipping
Dispatch
In-stock orders placed before 2pm AEST on a business day are picked and dispatched the same day. Anything ordered after that, or over a weekend or public holiday, goes out the next business day. If an item isn't in stock we'll be in touch with a realistic lead time rather than leave you guessing.
Delivery
We ship Australia-wide and freight larger or heavier items on the most sensible carrier for the job. Metro deliveries typically arrive in 1–3 business days; regional and remote areas take longer. You'll get tracking by email as soon as your order leaves us.
Freight charges
Calculated at checkout based on weight, size and destination. Bulky, oversized and dangerous goods items may attract additional freight — we'll always confirm before charging anything extra.
All prices include GST. For international or Pacific Island delivery, contact us for a freight quote.
Sub-micron Air Filtration
Removes oil, water and particles to 0.01 microns; 1/2" NPT ports for direct inline mounting; disposable element M-723.
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Related Products
